MKBT Load Cell Assembly Kit
MKBT LoadCell Assembly Kit is produced for mounting of BT series load cells. These are developed for tank and bunker applications.
PLATFORM TYPE LOAD CELL
BT Bending Beam Load Cell
Stock Code: 5 03 BT1
BT type load is a special steel body loadcell that works with the bending beam principle and has a high weighing performance.
SHARE:
GENERAL INFORMATION
"BT series loadcell was developed for low or middle capacity applications. It is made of special alloy steel material and shows high performance in weighing applications.
The stainless steel bellow and nickel-plated load cell is highly protected against external agents such as rain, dust, water that can make negative effect over the weighing performance.
BT load cell operates with principle of bending beam. By means of the bellow, some vibrations appearing during the weighing process are dissipated. That provides very accurate weighing results.
The cable output of the BT load cell is bound to an IP67 metal connector so that the protection class is further reinforced. BT load cell is produced with 5 meters standart cable.
ADVANTAGES AND USAGE AREAS
GENERAL APPLICATIONS
Packaging and Filling Machines
Dosing System
Conveyor Weighing Machines
Checkweigher
Tension Control Applications
Platform Scales with Low Capacity
CAPACITYES
The BT loadcell is produced in 10, 20, 50, 100, 200, 500 kg capacities
CAPACITYES
The BT loadcell is produced in 10, 20, 50, 100, 200, 500 kg capacities
Accuracy Class :
C1 , C3
Maximum Capacity :
Emax 10 , 20 ,50 ,100 ,200 ,500 kg
Minimum Dead Load :
0 %CN
Rated Output :
CN 2 mV/V
Maximum Number of Load cell Interval :
nLC C1 (1000), C3 (3000)
Minimum Verification Interval :
Vmin C1 (Emax/5000 ), C3 (Emax/10000 )
Minimum Dead Load Output Return MDLOR :
DR C1 (<± 0,050), C3 (± 0,0167 ) %CN
Zero Balance :
<±1 %CN
Temperature Effect on Zero :
C1 (<± 0,014), C3 (± 0,007 ) %CN / 5 0C
Temperature Effect on Output :
C1 (<± 0,0085), C3 (± 0,0055 ) %CN / 5 0C
Compensated Temperature Range :
-10/+40 °C
Temperature Range, Safe :
-30/+70 °C
Maximum Safe Overload :
EL 150 %°C
Breaking Load :
Ed 300 %°C
Excitation :
5-15 V
Input Empedance :
RLC 380±30 Ω
Output Empedance :
RO 350±3 Ω
Insulation Resistance :
Ris >1000 MΩ
Load Cell Body :
Nickel plated alloy steel
Environmental Protection :
IP68
Cable Type :
2X2X0,22
Cable Length :
5 m
Approval :
CE
Bearing Load Cell Assembly Kit
| Stock Code | Capacity/Length/Type | Product Description | Quantity | |
|---|---|---|---|---|
5 03 BT1 K005 |
5 kg |
-
1
+
|
GET A QUOTE
|
|
5 03 BT1 K010 |
10 kg |
-
1
+
|
GET A QUOTE
|
|
5 03 BT1 K020 |
20 kg |
-
1
+
|
GET A QUOTE
|
|
5 03 BT1 K050 |
50 kg |
-
1
+
|
GET A QUOTE
|
|
5 03 BT1 K100 |
100 kg |
-
1
+
|
GET A QUOTE
|
|
5 03 BT1 K200 |
200 kg |
-
1
+
|
GET A QUOTE
|
|
5 03 BT1 K500 |
500 kg |
-
1
+
|
GET A QUOTE
|
OUR ALTERNATE PRODUCTS
MT type load cells are manufactured from special alloy aluminum and coated with anodizing to increase their resistance to corrosion and industrial conditions. These loadcells work in compression, tensile or both compression and tensile directions with the bending beam principle.
PS type loadcells are manufactured from special alloy aluminum and coated with anodizing in order to increase their resistance to corrosion and industrial conditions. These load cells work in compression, tensile or both compression and tensile directions with the bending beam principle.
PL type loadcells are manufactured from special alloy aluminum and coated with anodizing to increase their resistance to corrosion and industrial conditions. These load cells work in compression, tensile or both compression and tensile directions with the bending beam principle.
RT type load cells are manufactured from special alloy aluminum and coated with anodizing to increase their resistance to corrosion and industrial conditions. These loadcells work in compression, tensile or both compression and tensile directions with the bending beam principle.
