Charging Pinner
EN
GENERAL INFORMATION
HVDC 20 Charging Generator is suitable for high voltage applications in industry and for DC
powered bars The unit output voltage and protection current value are set digitally by using the
front panel The output voltage can be between 0kV-20kV and current can be set between 1uA
The power supply includes remote on/off and remote voltage adjustment setting and is available
as positive or negative.
ADVANTAGES AND USAGE AREAS
ADVANTAGES
Easy to install
Digital output setting
Rotating front panel by 180°
4 x HV output
APPLICATIONS
In mold labelling (IML)
Bags on Roll
DVD Manufacture
Board Laminating
Compensating Stackers
Film on to Roll Cores
Multi Sheet Feeders
Side Weld Bag Handles
Shrink Wrappinng
Electrostatic Bonding
APPLICATIONS
Mains Voltage :
90 - 240V AC
Frequency :
50/60Hz
Max. Input Power :
45 W
Mains Connection :
IEC-320 Europe Type
Fuse :
1 AT
Output Voltage :
0 - 20kV
Ripple,Peak-Peak :
%5 Output Voltage at. max. load
Max. Output Current :
1uA
Max. Output Power :
20 W
Polarity :
N=negative/P=positive
Short Circuit Protection :
Automatic Output Protection on Output Stream
Ambient Temperature :
0-60°C
Voltage Stabilization :
%1 at max output voltage and load
Remote Control :
0V=Off 12-24V=On 0-10V DC
Input-Output Connectors :
4xHV output, 1xI/O Sub-D 25
Weight :
4.1 kg
High Voltage Setting :
0-10 V
Rated Output :
Relay Output That Reports The Fault Status of the Device, High Voltage Active Output, Grounding Load Output
Dimensions :
158 x 111 x 278 mm
Approval :
CE
Class :
IP60
Charging Pinner
Static Charging Bar
PULS Static Charging Bars are used in applications where the material needs to stick to one place or to each other.
Static Charging Bar
PULS Static Charging Bars are used in applications where the material needs to stick to one place or to each other.
5 PIN IML
It is one of our products developed for the full placement of the labels in the mold in in-mold labeling.
Silicon Cable
In-Mould Labeling Foam - Antistatic Foam
It is a High Voltage Resistant semiconductor used on the front surface of the static charging apparatus.
DC High Voltage Distributor
The DC high voltage distributor is designed for easier connection in high voltage applications.
| Stock Code | Capacity/Length/Type | Product Description | Quantity | |
|---|---|---|---|---|
3DCYK02 |
1
|
GET A QUOTE
|
OUR ALTERNATE PRODUCTS
Static Charger Power Supply is used for high voltage applications in industry and DC fed bars.
Static Charger Power Supply is used for high voltage applications in industry and DC fed bars.
Smart Charger is a high voltage generator designed to feed high voltage electrodes. High tension causes the material to bond temporarily.
Static Charger Power Supply is used for high voltage applications in industry and DC fed bars.
Static Charger Power Supply is used for high voltage applications in industry and DC fed bars.
