CHARGING GENERATOR
Static Charging Generator 30kV
Stock Code: 3DCYK03
Static Charger Power Supply is used for high voltage applications in industry and DC fed bars.
SHARE:
GENERAL INFORMATION
HVDC 30 Charging Generator is suitable for high voltage applications in industry and for DC powered bars The unit output voltage and protection current value are set digitally by using the front panel The output voltage can be between 0kV-30kV and current can be set between 5uA The power supply includes remote on/off and remote voltage adjustment setting and is available as positive or negative.
ADVANTAGES AND USAGE AREAS
ADVANTAGES
  • Easy to install
  • Digital output setting
  • Rotaring front panel by 180°
  • 4 x HV output

  • APPLICATIONS
  • In mold labelling (IML)
  • Bags on Roll
  • DVD Manufactoture
  • Board Laminating
  • Compensating Stackers
  • Film Bag with Gusset
  • Multi sheet Feeders
  • Fiat Bag With Gusset
  • Side Weld Bag Handles
  • Shrink Wrapping
  • Electrostatic Bonding
  • Mains Voltage :
    90 - 240V AC
    Frequency :
    50/60Hz
    Max. Input Power :
    190 W
    Mains Connection :
    IEC-320 Europe Type
    Fuse :
    1 AT
    Output Voltage :
    0 - 30kV
    Ripple,Peak-Peak :
    %5 Output Voltage at. max. load
    Max. Output Current :
    5mA
    Max. Output Power :
    150 W
    Polarity :
    N=negative/P=Positive
    Short Circuit Protection :
    Short Circuit Current Adjust
    Ambient Temperature :
    0-60°C
    Voltage Stabilization :
    %1 at max output voltage and load
    Remote Control :
    0V=Off 12-24V=On 0-30V DC
    Input-Output Connectors :
    4xHV output, 1xI/O Sub-D 25
    Weight :
    7,1 kg
    High Voltage Setting :
    0-10 V
    Rated Output :
    Relay Output That Reports The Fault Status of the Device, High Voltage Active Output, Grounding Load Output
    Dimensions :
    245 x 113 x 358 mm
    Approval :
    CE
    Class :
    IP20

    PDF document is being prepared. Please try again later...

    PDF document is being prepared. Please try again later...

    Charging Pinner
    Charging Pinner
    Static Charging Bar
    PULS Static Charging Bars are used in applications where the material needs to stick to one place or to each other.
    5 PIN IML
    It is one of our products developed for the full placement of the labels in the mold in in-mold labeling.
    Silicon Cable
    High Voltage Silicon Cable
    In-Mould Labeling Foam - Antistatic Foam
    It is a High Voltage Resistant semiconductor used on the front surface of the static charging apparatus.
    DC High Voltage Distributor
    The DC high voltage distributor is designed for easier connection in high voltage applications.
    Stock Code Capacity/Length/Type Product Description Quantity
    3DCYK03
    1
    TEKLİF İSTE

    OUR ALTERNATE PRODUCTS

    Static Charger Power Supply is used for high voltage applications in industry and DC fed bars.
    Static Charger Power Supply is used for high voltage applications in industry and DC fed bars.
    Static Charger Power Supply is used for high voltage applications in industry and DC fed bars.
    Static Charger Power Supply is used for high voltage applications in industry and DC fed bars.
    Smart Charger is a high voltage generator designed to feed high voltage electrodes. High tension causes the material to bond temporarily.