SP-1000 TENSION VOLTAGE TESTER
SP-1000 Tension Voltage Tester
Stock Code: 3 SP100 01 0001
The SP-1000 is a non-contact high voltage detector developed to determine whether static electricity prevention systems (AC power supplies, AC bars, and AC cables) are operational. It makes maintenance and control processes safe by detecting invisible high voltage through both visual (LED) and audible (Buzzer) alerts.
SHARE:
GENERAL INFORMATION
Operation and Use of the Device
The SP-1000 is used like a voltage tester pen but is specifically designed to detect much higher voltage levels (AC).
Power On: When you press the on-off button, the green LED lights up. This indicates that the device is ready for operation.
Detection: Bring the probe close to the product you want to check (e.g., ionizer bar needles or cable).
Warning: If AC high voltage is present, the green LED turns off, the red LED starts flashing, and the audible buzzer warning is activated.
Safety Warning: Never use the device if the antenna part of the probe is damaged or if the insulation is stripped; this may pose a risk of electric shock.
Important Note: The SP-1000 is safely used with Puls 5500VAC/7500VAC power supplies, anti-static bars, and blower cables. However, since nozzle or gun cables featuring a grounded steel spiral are armored, measurement cannot be performed through the cable; these products should only be checked at the needle tips.
ADVANTAGES AND USAGE AREAS
| Feature | Detail |
|---|---|
| Operating Range | 2,500 - 10,000 VAC (AC Only) |
| Detection Type | Non-contact |
| Power Supply | 2 x 1.5V AAA Batteries |
| Operating Time | 6 hours continuous / 1.5 years Stand-by |
| Protection Class | IP54 (Dust and splash resistant) |
| Dimensions | 25 x 19 x 140 mm |
Measurement Range :
0-160 kV
Resolution :
100 V
Accuracy :
Better Than+/-5%
Display :
3 1/2 Dijit,LCD Display
Control :
Push Button
Power Supply :
9 Volt Replaceable battery
Dimensions :
73 x 122 x 30mm
Case Carrying :
Case Supplied
