Puls Hole Detector is a high-speed control unit designed specifically for the packaging and wrapping industry to detect holes in materials passing through the production line and to count bags by detecting these holes.
PERFORATION DETECTOR
Smart Perforation Detector
Stock Code: 3 PD2 01 N018
It detects up to 300 holes per minute with 18kV adjustable output voltage and PLC compatibility. Thanks to its titanium needle sensor, it provides a durable, high-speed, and cost-effective counting solution for plastic bag production lines.
SHARE:
GENERAL INFORMATION
The Puls Perforation Detector is capable of detecting 300 holes per minute and operates at a frequency of 5Hz. The output voltage can be adjusted between 0kV and 18kV. The output voltage of the Smart Perforation Detector can be adjusted via a control unit with or without a display. Alternatively, it can be controlled via a PLC with analog output without the need for these units. The LEDs on the front panel indicate the amplitude of the output voltage. When a hole is detected, the counting LED flashes. Thanks to the 3-pin titanium needle-type counting sensor connected to its output, it is mounted facing a grounded surface at the application point. When an arc occurs from the needle to the ground through a hole, the optocoupler at the device output generates a 100ms pulse.
ADVANTAGES AND USAGE AREAS
ADVANTAGES
- Easy to install
- Long service life
- Low cost
APPLICATIONS
Counting in bag production
High Voltage Active Signal
22-27 V DC 50 mA max.
Connector
M12, 5-pin
Output Voltage
0-18 kV
Output Current
Max. 0.5 mA
Supply Voltage
22-27 V DC
Power Consumption
Max. 0.8 A
Standard 5x0.34 mm²
5x10m / 0.6 Ω (M12 Connector)
Remote Operation
24 V DC High Voltage On, 0 V DC High Voltage Off
High Voltage Adjustment
4-20 mA or 0-10 V
Average Product Weight
670 gr
Our Alternate Products
